Power Bond 90™

12 units of Net Wt 1 oz each SKU: ET2590

$180.00

Power Bond 90™ automatically dispenses into equal parts with one push. The new generation applicator ensures no mess, no spilling and no dried out tubes. Power Bond 90™ works best as an all-purpose epoxy and adhesive for small parts. It bonds variety of materials: ceramic, glass, wood, leather, fiberglass, metals, and most plastics. It features 2000 psi sheer strength and once cured withstands -40°F to 140°F (-40°C to 60°C). Power Bond 90™ sets in 90 seconds, and item can be handled in 10 minutes; it reaches full cure after 24 hours. Cure color: light yellow. Positioning time 60 seconds.


12 units of Net Wt 1 oz each
$180.00
SKU: ET2590

Instant setting epoxy and adhesive. Sets in 90 seconds and can be handled in 10 minutes. Best as an all-purpose epoxy and adhesive for small parts. Bonds variety of dissimilar materials.

Features & Benefits
Sets in 90 seconds
Bonds ceramic, glass, wood, leather, fiberglass, metals, and most plastics
2000 psi strength and -40°F to 140°F temperature range

Who
Building engineers, electricians, carpenters, public works departments, hospitality, apartments, military, automotive, car detailing shops, public transportation, power plants, schools, government facilities, aerospace, construction and maintenance

Where
Small parts that need mending

What
Ceramic, glass, wood, leather, fiberglass, metals, most plastics

Protect work surfaces (metal foil works well). Bonding surfaces should be clean and dry. Roughen smooth surfaces for better adhesion (using abrasive and sandpaper). Remove storage cap located in plunger. POINT TIPS AWAY FROM FACE AND BODY WHILE OPENING. Point syringe towards mixing tray and snap off tip end and open. Use clean cardboard to mix on. DO NOT mix on metal. Dispense equal parts of resin and hardener by pressing down slowly on plunger. Mix thoroughly until uniform color using a wooden stick, plastic knife, or other clean non-metal stirrer. Apply mixed epoxy both surfaces to be bonded and hold parts together with a clamp, tape or weights. Remove excess epoxy immediately using a paper towel and denatured alcohol, prior to set. Product sets in 90 seconds. Item can be handled in 10 minutes. Full cure in 24 hours. NOTE: For cooler temperatures, setting time may be longer. To seal syringe, pull back on plunger, wipe tips and place cap firmly on tips. Cap will only fit one way on tips. Store upright with tips up. Cured product withstands -40°F to 140°F (-40°C to 60°C). Use in well ventilated area. Prolonged exposure to temperatures above 85°F may result in pressure build-up in unopened syringe. Use caution when opening, pointing tips away from face and body. Not recommended for drinking water applications. When cured product will be visible, pre-check color by mixing small sample on clean cardboard and viewing final color after 48 hours.

Epoxy resin (Bisphenol A) (25068-38-6)

Health: 2
Flammability: 1
Reactivity: 0
Personal Protection: B

Weight2 lbs
Dimensions6 in x 6 in x 8 in
Package SizeNet Wt 1 oz
Units Per Case12