Slip resistant textured epoxy coating. Resistant to chemicals and oils. Dries quickly.
Features & Benefits
Formulated with plastic beads to enhance texture
Dry to touch in 10 minutes
Resistant to oil, gas, solvents and chemicals
Vehicle maintenance, painters, building engineers, power plants, municipalities, public transportation, fire departments, maintenance shops, marine maintenance, gas and oil companies, military, road crews, construction and maintenance
Ladders, stairs, boat docks, ramps, work areas, garages, steps, industrial showers, truck beds, walkways
Improves traction on wood, steel, concrete, and fiberglass
1. Surface must be clean, dry and free of rust before painting. Protect surrounding areas from spray mist. For best results, use when can is between 50F and 90F (10C and 32C). 2. Shake can at least one minute after rattle is heard and occasionally during use. 3. Spray with steady even strokes at a distance of 6 to 10 inches (15 to 25cm). Several light coats give a better finish than one heavy coat. Tack free in 10 minutes and fully cured in 24 hours. 4. If clogging develops, turn spray head 1/4 turn or remove and clean spray head slot. DO NOT stick pin or other object into can opening. With can and spray head pointed away from you, reinsert spray head with a gentle twisting motion. 5. To clear spray head for future use, turn can upside down and spray for 3 seconds. Completely empty cans may be recycled or disposed of with regular trash. Dispose of partially empty cans responsibly. DO NOT incinerate or compact.
PM Acetate (108-65-6)
Methyl Isobutyl Ketone (108-10-1)
Calcium Carbonate (1317-65-3)
Silicone Dioxide (112926-00-8)
Ethyl Benzene (100-41-4)
"Contents Partially Unknown", Epoxy Resin
Anti-Slip Epoxy Coating Does Not Exceed 2.10 MIR.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.