Power Bond 300™

12 units of Net Wt 1 oz each SKU: ET2530

$168.00

Power Bond 300™ automatically dispenses into equal parts with one push. The new generation applicator ensures no mess, no spilling and no dried out tubes. Power Bond 300™ works best as a general use epoxy. It bonds variety of materials: glass, china, wood, fiberglass, metal, plastic or any project requiring 5 minute set time for parts. It features 1200 psi sheer strength and once cured withstands -40°F to 176°F (-40°C to 80°C). Power Bond 300™ sets in 5 minutes, and item can be handled in 30 minutes; it reaches full cure after 24 hours. Cure color: light yellow. Positioning time 2-3 minutes.


12 units of Net Wt 1 oz each
$168.00
SKU: ET2530

Quick setting epoxy and adhesive. Sets in 5 minutes and can be handled in 30 minutes. Best as an all-purpose epoxy and adhesive for small parts. Bonds variety of dissimilar materials.

Features & Benefits
Sets in 5 minutes
Bonds ceramic, glass, wood, leather, fiberglass, metals, and most plastics
1200 psi strength and -40°F to 176°F temperature range

Who
Building engineers, electricians, carpenters, public works departments, hospitality, apartments, military, automotive, car detailing shops, public transportation, power plants, schools, government facilities, aerospace, construction and maintenance

Where
General use projects that require 5 minute set time

What
Glass, metal, china, wood, fiberglass, plastic

Protect work surfaces (metal foil works well). Bonding surfaces should be clean and dry. Roughen smooth surfaces for better adhesion (using abrasive and sandpaper). Remove storage cap located in plunger. POINT TIPS AWAY FROM FACE AND BODY WHILE OPENING. Point syringe towards mixing tray and snap off tip end and open. Use clean cardboard to mix on. DO NOT mix on metal. Dispense equal parts of resin and hardener by pressing down slowly on plunger. Mix thoroughly until uniform color using a wooden stick, plastic knife, or other clean non-metal stirrer. Apply mixed epoxy both surfaces to be bonded and hold parts together with a clamp, tape or weights. Remove excess epoxy immediately using a paper towel and denatured alcohol, prior to set. Product sets in 5 minutes. Item can be handled in 30 minutes. Full cure in 24 hours. NOTE: For cooler temperatures, setting time may be longer. To seal syringe, pull back on plunger, wipe tips and place cap firmly on tips. Cap will only fit one way on tips. Store upright with tips up. Cured product withstands -40°F to 176°F (-40°C to 80°C). Use in well ventilated area. Prolonged exposure to temperatures above 85°F may result in pressure build-up in unopened syringe. Use caution when opening, pointing tips away from face and body. Not recommended for drinking water applications. When cured product will be visible, pre-check color by mixing small sample on clean cardboard and viewing final color after 48 hours.

Epoxy resin (Bisphenol A) (25068-38-6)

Health: 2
Flammability: 1
Reactivity: 0
Personal Protection: B

Reviews

There are no reviews yet.

Be the first to review “Power Bond 300™”

Your email address will not be published. Required fields are marked *

Weight2 lbs
Dimensions6 in x 6 in x 8 in
Package SizeNet Wt 1 oz
Units Per Case12